R E M OT E C O N T RO L
Serial Command Set
SERIAL COMMAND SET
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The HDR 205HD has a limited command set. The commands are simple, four-
character "words." There are no arguments.
B U F F E R E D C O MM A N D S
Serial commands must be buffered and issued to the recording device all at
once. That is, you cannot send the commands character by character and
execute with a carriage return. If the complete command is not issued with less
than a 300 millisecond delay between characters, the instruction is ignored.
Buffered commands can be sent by pre-programming the four-character
command string in a communications program which offers this feature. Many
communications programs provide for programming buffered text strings.
Dedicated serial controllers and terminal devices can also be pre-programmed
with the commands and used for RS-232 control of the HDR 205HD.
S E R I A L C O MM A N D S E T
The table below details the command set for the HDR 205HD. Commands are
case sensitive and must be entered in uppercase as shown.
TABLE 3. RS-232 Serial Command Set
Command
W20F
W209
W211
Description
Operate (ON/OFF)
Record
Comments
Stop
Play
W219
W229
W239
W201
W01B
Pause
Fast Forward
Rewind
Write VISS mark
Unit must be in "Play" or "Record" to write
a VISS mark
Erase next VISS mark
W003
W02B
W00B
Seek to next VISS mark
Seek to previous VISS mark
See "Seeking to Multiple VISS Marks"
See "Seeking to Multiple VISS Marks"
S E E K I N G T O M U L T I P L E V I S S M A R K S
It is possible to instruct the VCR to seek forward and backward multiple VISS
marks. Repeated seek commands, either W02B (next) or W00B (previous),
increase the VISS mark search counter as seen on the front panel LCD display.
The counter appears as a red numeral with a “-” for seeking to previous marks.
August 7, 2001
HDR 205HD User Manual
9