Rosen Entertainment Systems GPS Receiver GM series5 User Guide

Quick Start Guide  
GM Series5  
Multimedia Navigation System  
 
NOTICE OF INTENDED USE  
Some features of Rosen Electronics are not intended for viewing by the driver when the vehicle is in motion, such as movie  
playback. When using navigation, minimize the amount of time spent viewing the screen and use voice prompts as much  
as possible. Avoid prolonged use of the touch screen controls. Such use might distract the driver or interfere with the  
driver’s safe operation of the vehicle, and thus result in serious injury or death. Such use might also violate state or local  
laws.  
Rosen Electronics disclaims any liability for  
any bodily injury or property damage that might result  
from any improper or unintended use.  
Copyright © 2015 by Rosen Electronics,LP. All rights reserved. Except as permitted under  
the Copyright Act of 1976, no part of this publication may be reproduced or distributed in any  
form or by any means, or stored in a database or retrieval system, without the prior written  
permission of Rosen Electronics, LP.  
ABOUT THE REGISTERED TRADEMARKS  
This item incorporates copy protection technology that is protected by U.S. patents and other  
intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are  
prohibited.  
NAVIGATION MAPS  
Car navigation maps are frequently updated. While the database was judged to be as  
accurate as possible at the time of its release, a map database can never be 100% accurate.  
Road information that is maintained in the map databases, such as turn restrictions or road  
names may change over time.  
Errors or missing information in the map data are not covered by the Product Warranty.  
New and/or updates for the map data are the responsibility of the End-user.  
NOTE: Features listed in this manual are subject to change without notice.  
 
For complete Owner’s and Navigation Manuals,  
please visit  
Rosen Electronics online at  
 
Main Radio Screen  
1. Press  
to enter Navigation Mode.  
2. Press  
right arrow to access Rosen  
to select next set of  
Menu options.  
3. Press  
radio presets.  
Rosen Menu Options  
Navigation: Press to enter Navigation  
HDMI Input: Press to access HDMI video  
source. For Audio to be heard over factory  
speakers. “AUX JACK harness must be  
installed” Press “Media” button once to enter  
AUX audio.  
AUX In: Press to display A/V input when a  
source is connected. Press “Media” button  
once to enter AUX audio.  
Camera: Press to view Rosen Camera input  
if installed.  
Settings: User selectable options.  
 
1
Navigation  
Before operating your Rosen Navigation system, please carefully read and  
follow the instructions provided in the “Safety Information and Precautions”  
located on the inside back cover of this Quick Start Guide.  
Start Up  
When the navigation software starts, you will see the reminder warning to use your  
navigation software safely and lawfully.  
You must accept these conditions to continue  
Please refer to the User’s Manual for additional information and warning on proper  
use of the Rosen Navigation product.  
 
2
Navigation Menu  
On the Navigation view, tap  
to open the Navigation menu.  
You can see the following menu options when you are navigating without a planned route:  
Button  
Function  
Select your destination by entering an address or its coordinate, or by  
selecting a Place, a Saved Location, or a Saved Route. You can also  
look up your recent destinations from the History.  
Build your route from one or more route points. You can also plan a route  
independently of your current GPS position by setting a new starting  
point.  
Access additional options and check navigation-related information.  
Customize the way the navigation software works.  
See information about the navigation software.  
 
3
With a planned route, the following menu options are also available:  
Button  
Function  
Add an intermediate destination to your route.  
See route alternatives to avoid parts of the route, or to avoid a specific  
road from your planned route.  
View the route in its full length on the map and check route  
parameters and route alternatives.Tap  
like Simulation or Route Preferences.  
to access additional options,  
Delete your route.  
Delete the next waypoint or the whole route.  
In the navigation menu, you have the following additional options:  
Button  
Function  
Open the Saved Locations screen where you can save a location as a  
favorite destination or edit a saved location.  
Set the Navigation voice volume or mute.  
Switch to 2D (  
), 2D North up (  
) view or back to 3D mode.  
Suspend navigation.  
Resume navigation.  
 
4
Access the User profiles menu where you can create new profiles or edit  
the existing ones. If several drivers are using the navigation system, they  
can create their own profiles with their own settings.  
Tap to put navigation to the background.  
The following options are also available on many of the menu screens:  
Button  
Function  
The Menu button appears when the Navigation view is displayed. Tap it  
to open the Navigation menu.  
The More button appears on the screen to display additional features.  
Tap it to open the list of additional features on certain screens.  
Tap it to return to the map from any menu screen.  
Tap the Back button to return to the previous screen. You can also press  
and hold this button to quickly return to the Navigation view from any  
other screen  
 
5
Useful Information Menu  
The Useful Information menu provides various additional functions. It can be found in  
the Navigation menu. You need an Internet connection via your cell phone to access  
online services, like parking and weather information.  
Button  
Function  
Shows information on the current position (latitude, longitude, nearest  
town, next crossing street, and so on) or the last known position if GPS  
reception is not available.  
Offers assistance near your current position.  
Offers a list of countries with useful driving information about the  
selected country (for example speed limits, maximum blood alcohol  
level).  
Shows statistical data of your trips, like the start time, end time and  
average speed. Track logs, the sequence of the positions given by the  
GPS receiver, can be saved together with the trip logs. They can later be  
displayed on the map.  
Shows a world map with the sunlit and dark areas of the world. Tap  
to check the exact sunrise and sunset times for all your route points.  
Shows the GPS Information screen with satellite position and signal  
strength information.  
 
6
Sound Settings  
You can modify the following settings:  
Button  
Function  
This is the main volume control. Adjust all the sound types below  
or mute them.  
Adjust the volume of the guidance sounds (verbal instructions) or  
mute it.  
Adjust the volume of the non-verbal alert sounds (beeps) or mute  
it.  
Turn off the attention tone preceding verbal instructions or adjust  
its volume.  
Adjust the volume or mute the sound played when pressing the  
button.  
You have the following options for each sound type:  
Button  
Function  
Volume  
Slider  
Adjust the volume of the related sound.  
Mute the related sound. The slider becomes inactive. Tap again to  
re-enable it.  
Button  
Function  
Disable verbal instructions. This function is enabled by default.  
Choose from the following options:  
• Announce the street names in the native language area of the  
selected voice guidance language.  
• Announce the road numbers only.  
• Announce the maneuvers only.  
 
7
Button  
Function  
Street names sound correct only if you use a native voice profile  
for the country. Choose from the following options:  
• Try to read the street names in a foreign country.  
• Announce the road numbers only.  
• Announce the maneuver only.  
Set whether you want an immediate announcement for the  
next maneuver after each turn, or it is enough to receive the  
information when the turn is near.  
Set the verbosity of the voice instructions, that is how much they  
tell and how often they speak.  
• Minimal: the voice instruction is given once right before the next  
maneuver.  
• Medium: the voice instruction is given when approaching the  
next maneuver and it is repeated right before the maneuver.  
• Verbose: the voice instruction is given first relatively far from the  
next maneuver, it is repeated when approaching the next turn,  
and it is repeated again right before the actual maneuver.  
Allow reading out a quick summary of the route whenever a route  
is calculated.  
Allow reading out information about the country you have entered,  
when you cross country borders.  
Allow reading out real-time traffic messages.  
Allow announcing system messages.  
 
8
Warning Settings  
You can enable and modify the following settings:  
Button  
Function  
The System is able to warn you if you exceed the current speed  
limit. This information may not be available in your region, or may  
not be fully correct for all roads on the map.  
The maximum speed set in the vehicle profile is also used for this  
warning. The System alerts you if you exceed the pre-set value  
even if the legal speed limit is higher.  
This setting lets you decide whether you wish to receive visible  
and/or audible warnings.  
The following warning types are available:  
• Visual warning: the current speed limit is shown on the map  
when you exceed it.  
• Audio and Visual warning: besides the current speed limit being  
shown on the map, you also receive a verbal warning when you  
exceed the speed limit with the set percentage.  
If you prefer to see the speed limit sign on the map all the time  
(normally, it is shown only if you exceed the limit), you can set it  
here.  
You can also set the relative speed above which the appliction  
initiates the warning by adjusting a slider. The value can be  
different within and outside towns.  
 
9
Regional Settings  
You can modify the following settings:  
Button  
Function  
It displays the current written language of the user interface. Tap it  
to select a new language from the list of available languages. The  
application restarts after you change this setting and confirm it.  
It shows the current voice guidance profile. Tap it to select a new  
profile from the list of available languages and speakers.Tap any  
of these to hear a sample voice prompt.  
Just tap  
when you have selected the new spoken language.  
Different voice profiles are capable of different levels of service:  
• Natural Voice (street names not announced):  
These pre-recorded sounds can only tell you basic information  
about turns and distances.  
• TTS Voice (street names announced): These computed voices  
can read out complex instructions, street names or system  
messages.  
• TTS Voice with a microphone icon: Besides the above  
mentioned profiles, it can also be used for voice recognition.  
You can set the measurement units and time/date format to be  
used. Rosen DB Fit System may not support all the listed units in  
some voice guidance languages.  
By default, the time zone is taken from the map information and  
adjusted by your current location. Here you can manually set the  
time zone and the daylight saving time.  
 
10  
Trip Monitor Settings  
Trip logs contain useful information about your recorded trips. You can enable  
and modify the following settings:  
Button  
Function  
Trip monitor can record statistical data of your trips. If you need  
these logs later, you can let the application save them automatically  
for you.  
Track logs, the sequence of the positions given by the GPS  
receiver, can be saved together with trip logs. They can later be  
displayed on the map. You can let the application save track logs  
whenever it saves a trip.  
This is not a button. This line shows the current size of the trip  
database, the sum of all trip and track logs saved.  
 
11  
Safety Information and Precautions  
WARNING! Please read and follow the following safety precautions.  
Failure to follow the instructions below may increase  
your risk of collision and personal injury.  
The Rosen Navigation software is not a substitute for your personal judgment. The route suggestions should never  
supersede any local traffic regulation or your personal judgment and /or knowledge of safe driving practices. Prior  
to completing any  
maneuvers suggested by your Rosen Navigation software (for example, a U-turn or a left  
turn), verify that you can legally and safely complete the maneuver. Do not follow route suggestions if they direct  
you to perform an unsafe or illegal maneuver, would place you in an unsafe situation, or would route you into an  
area that you consider unsafe.  
Do not use the Rosen Navigation software to locate emergency services (such as police, fire stations, hospitals,  
and clinics). The database may not include all emergency service providers. Use your own best judgment and ask  
for directions in these situations.  
If the vehicle is in motion, only a passenger should program the Rosen Navigation software. The driver should not  
program the system unless the vehicle is parked in a safe location.  
The Rosen Navigation software’s map database provides information on suggested routes without regard to fac-  
tors that may affect your driving experience or the time required to arrive at your destination. For example, the sys-  
tem does not reflect road detours, closures or construction, some road characteristics (e.g., road surface, slope or  
grade, weight or height restrictions, etc.), temporary traffic congestion, weather conditions, and similar factors.  
Vehicle Position  
The Rosen Navigation software’s computer considers vehicle speed and heading changes, together with longitude  
and latitude information, to accurately determine vehicle heading and position on a digital map.  
Map and Information Database  
The map database used by your Rosen Navigation software was created using high-resolution aerial and land  
based data  
collection.  
Car navigation maps are frequently updated. While the database was judged to be as accurate as possible at the  
time of its release, a map database can never be 100% accurate. Road information that is maintained in the map  
databases, such as turn restrictions or road names may change over time.  
Errors or missing information in the map data are not covered by the Product Warranty. New and/or updates for  
the map data are the responsibility of the End-user.  
End-User License Agreement  
Please refer to the Rosen Navigation User’s Manual to review and accept the terms and conditions in the End-  
User License before operating this product.  
 
 
DB-GMSERIES5-QSG Rev B  
 
All rights reserved. Copyright 2015 Rosen Electronics, LP  

Radica Games Games i5037 User Guide
Renesas Network Card PCA7425 User Guide
RIDGID Air Compressor OL90150 User Guide
Ryobi Trimmer P2001 User Guide
Samsung DVR SVR 940 450 User Guide
Samsung Flat Panel Television LC550 ZC User Guide
Samsung Microwave Oven M1914 User Guide
Samsung Projection Television ST 42W5P User Guide
Schumacher Battery Charger 85 716 User Guide
Sennheiser Headphones HD 224 X User Guide